| G1367-87201 | Needle assy, standard well plate sampler |
| G1367-87202 | Needle Assy for G1367D |
| G1367-87300 | Loop capillary assy well plate sampler |
| G1367-87302 | Seat capillary 0.17x 100mm, 0.8 mm od |
| G1367-87303 | Seat capillary 0.12 x 100 mm, 0.8 mm od |
| G1367-87304 | SST Capillary 250x 0.17mm,m/m,ps/ps |
| G1373-87300 | SST Capillary,250x0.12mm, 1 fitting |
| G1375-87300 | Seat Capillary, 50um, 150mm |
| G1375-87301 | Fused silica/EK capillary 50um, 22cm |
| G1375-87302 | Fused silica/EK capillary 50um, 20cm |
| G1375-87303 | Fused silica/EK capillary 100um, 110cm |
| G1375-87304 | Fused silica/EK capillary 50um, 50cm |
| G1375-87305 | Fused silica/EK capillary 100um, 22cm |
| G1375-87306 | Fused silica/EK capillary 100um, 55cm |
| G1375-87308 | Fused silica/EK capillary 75um, 40cm |
| G1375-87309 | Fused silica/EK capillary 50um, 28cm |
| G1375-87310 | Fused silica/EK capillary 50u, 55cm |
| G1375-87311 | Fused silica/EK capillary 75um, 50cm |
| G1375-87312 | Fused silica/EK capillary 100um, 20cm |
| G1375-87313 | Fused silica/EK capillary 50um, 70cm |
| G1375-87314 | OQ/PV capillary for u-LC system |
| G1375-87315 | Loop capillary, 8 ul for G1377A |
| G1375-87316 | Seat Capillary, 75um, 150mm |
| G1375-87317 | Seat Capillary, 100 um, 150 mm |
| G1375-87318 | Fused silica/EK capillary, 125um 55cm |
| G1375-87320 | Fused silica/ek capillary, 25um 10cm |
| G1375-87321 | Fused Silica/EK capillary 25u, 22cm |
| G1375-87322 | Fused Silica/EK capillary 25u, 35cm |
| G1375-87323 | Fused silica/EK capillary, 25um 55cm |
| G1375-87324 | Fused silica/EK capillary, 25um 70cm |
| G1375-87325 | Fused silica/EK capillary, 50um 10cm |
| G1375-87326 | Waste tube, FEP, 1.6mm od, 08mmid |
| G1375-87327 | Fused silica/EK capillary, 75um 65cm |
| G1375-87328 | Fused Silica/EK Capillary, 125um, 220m |
| G1375-87329 | Fused Silica/EK Capillary, 125um, 80m |
| G1375-87400 | SST capillary 280x0.17mm, 1/16in fitting |
| G1376-60003 | BOttle head assembly for u-LC system |
| G1376-60005 | Seal wash kit for 1260 cap/nano pump |
| G1376-60015 | Support ring for cap/nano/SFC pump |
| G1376-60016 | Seal holder for cap/nano/SFC pump |
| G1376-68707 | Extended flow range kit (100 ul/min) |
| G1376-68710 | PM kit for G1376A Capillary Pump |
| G1377-44900 | tool for Micro Seat Capillary Mounting |
| G1377-60002 | Seal support assy |
| G1377-60012 | Seal support back up assy for G1367D |
| G1377-60023 | Micro analytical head for G1367D |
| G1377-87000 | Seat Assy Micro WPS (100um ID cap.) |
| G1377-87001 | Seat Assy Micro WPS (75um ID cap.) |
| G1377-87002 | Seat Assy Micro WPS (50 um ID cap.) |
| G1377-87101 | Seat assy for G1377 u-well plate sampler |
| G1377-87201 | Needle assy G1377A u-well plate sampler |
| G1377-87300 | Loop capillary, 40ul for G1377A |
| G1377-87301 | SST capillary, 0.25mm id, 13cm long |
| G1377-87310 | Loop capillary 40uL for G1367D |
| G1379-67310 | u-Vacuum degasser tubing kit |
| G1512-60530 | Y-Cable, G1512A, 5890A, APG Remote |
| G1530-60560 | Signal cable, general purpose, 6 pins |
| G1530-60570 | Cable Assembly, 6890A to 3396 |
| G1530-60590 | Cable, 6890, ext. events |
| G1530-60600 | Cable, RS232, 9F/9F |
| G1530-60610 | Cable, GC to PC, 9F/25M |
| G1530-60930 | Cable, Remote, 6890, 9M/9M |
| G1530-80650 | Exhaust deflector assy |
| G1531-20690 | Collector body (6890 FID) |
| G1531-20700 | Collector Insulator (6890 FID) |
| G1531-21090 | Hasloy Collector Body |
| G1531-60680 | Igniter Cable Assembly |
| G1531-60690 | 6890 FID collector assembly |
| G1531-80560 | Jet, Capillary Optimized,0.29mm ID |
| G1531-80620 | Jet,Cap Optimized, high temp,0.47mm ID |
| G1532-20710 | 6890 TCD Packed Column Adapter |
| G1532-60675 | TCD Replacement Cell 6890 |
| G1532-60685 | TCD Cell 6890 |
| G1532-80540 | Adapter Weldment |
| G1533-80565 | 6890 ECD Make-up gas adapter |
| G1534-20530 | NPD Collector Funnel |
| G1534-40020 | Insulator, NPD Upr |
| G1534-40030 | Insulator, NPD Lower |
| G1534-60570 | NPD bead assembly |
| G1534-80580 | NPD jet,Capillary with extended tip |
| G1534-80590 | NPD jet, Adaptable cap with extended tip |
| G1540-85010 | Oral Fluids Analyzer Test Sample |
| G1544-20590 | Retaining nut |
| G1544-60575 | Split/Splitless Insert 6890 EPC |
| G1544-60585 | S/SL Insert Weldment, uses large filter |
| G1544-80530 | 6890 Splitvent replacement cartridge 2pk |
| G1544-80550 | Split trap assembly (6890) |
| G1544-80580 | S/SL Insert Weldment, for use with ECD |
| G1545-80520 | blPCOC 530 Septum Nut |
| G1580-60060 | CPM-1/16x0.10inID Tube Assy, 50cm, Inert |
| G1580-60062 | CPM-1/16x0.20inID Tube Assy, 50cm, Inert |
| G1580-60575 | 6890 Insert Weldment, for valved systems |
| G1580-60585 | Insert Weldment, valved system w/filter |
| G1580-61060 | Micro Fluidics 1/16in x 0.010 Union Kit |
| G1580-80060 | CPM-1/16in x 0.10in ID Tube Assy, 50cm |
| G1580-80062 | CPM-1/16in x 0.20in ID Tube Assy, 50cm |
| G1600-60002 | Capillary cassette |
| G1600-60007 | Electrode assembly |
| G1600-60013 | Capillary cassette for CE/MS |
| G1600-60027 | HP 3D CE High Sensitivity cell-replace |
| G1600-60150 | Alignment interface 25um |
| G1600-60210 | Alignment interface for std cap 50um id |
| G1600-60230 | Alignment intrfc light path cap 50um id |
| G1600-60310 | Alignment interface for std cap 75um id |
| G1600-60330 | Alignment intrfc light path cap 75um id |
| G1600-62402 | Plastic Screw for CE 10/pk |
| G1600-63200 | CE Cell Fitting Kit |
| G1600-67201 | Pre-puncher |
| G1600-67220 | CE-MS PVA capillary w/o window |
| G1600-67312 | CE-MS fused silica capillary w/o window |
| G1600-68706 | HPCE startup kit |
| G1600-68723 | High Sensitivity Cell Kit for HP 3DCE |
| G1607-20030 | Gasket |
| G1607-60041 | ES needle assembly for CE-MS |
| G1680-63200 | USB-GPIB cable |
| G1680-63715 | PCI GPIB Card for Windows NT, 2000, XP |
| G1680-63720 | USB 2.0 Cable (10 ft.) |
| G1811-23200 | Beveled edge needle for G1811A |
| G1820-60160 | Sample line connector for concentric neb |
| G1820-60393 | Sampling and skimmer cone wrench (4500) |
| G1820-65008 | PTFE tubing for carrier/makeup gas, 1m |
| G1820-65009 | PFA sample tubing kit(0.5mm id,1.6mm od) |
| G1820-65018 | Filter for cooling water for 7500 Series |
| G1820-65023 | Ar gas tubing kit (incl.filter) |
| G1820-65025 | O-Ring for sampling cone, Viton, 1/pk |
| G1820-65027 | Connectors for Plasma + Aux. gas, 1 ea |
| G1820-65052 | Carrier gas line connector for conc. neb |
| G1820-65075 | O-Ring kit, concentric neb. ICP-MS, 1/pk |
| G1820-65105 | PFA sample tubing, 0.5mm id,1.6mm od,5m |
| G1820-65119 | Connector, blend gas line, Crossflow 2/p |
| G1820-65141 | Sample tubing kit for Cross flow neb |
| G1820-65214 | Carrier gas line connector Babington neb |
| G1820-65276 | Sample tubing w/connector for Babington |
| G1820-65345 | Babington Nebulizer Removal Tool |
| G1820-65435 | Screws for Skimmer Base (4/pk) |
| G1820-65478 | PFA sample tubing, 0.3mm od,1.6mm od,3m |
| G1820-65482 | Bushing at spray chamber drain (5/pk) |
| G1820-65503 | Connector for Spray Chamber Drainage |
| G1820-65504 | Bushing at spray chamber drain, organic |
| G1820-65505 | Drain tank for organic solvent, 2L. 1/pk |
| G1820-65515 | Tubing for Drainage (4.0mm id, 2.5m) |
| G1820-65526 | Tubing w/guide 0.15 id, 1.6 od, 70cm 5/p |
| G1820-65527 | Tubing w/guide 0.2id, 1.6od, 70cm, 5/pk |
| G1820-65531 | Tubing w/guide 0.3id, 1.6od, 70 cm, 5/pk |
| G1820-65533 | Ferrule + O-ring kit for carrier gas 1/p |
| G1820-65541 | Basic LC connection kit |
| G1820-80341 | Ar Gas Filter |
| G1820-81012 | Body Tube assembly (nning gauge) |
| G1820-81013 | Electrode kit for nning Gauge |
| G1833-65024 | Screw/Spacer kit-Extract.Lens(7500a/i/s) |
| G1833-65025 | Screw/Spacer Kit for Ion Lens(7500a/i/s) |
| G1833-65071 | Online ISTD Addition kit (7500 only) |
| G1833-65079 | Interface wrench, skimmer cone removal |
| G1833-65088 | Screw kit for reaction cell 7500 series |
| G1833-65089 | Tubing for reaction gas, 2/pk |
| G1833-65094 | Octopole for 7500 Series |
| G1833-65096 | ORS CLEANING KIT |
| G1833-65125 | Screw + spacer kit for ion lens,7500cs |
| G1833-65133 | Octopole for 7500cs/ce/cx |
| G1833-65134 | Octopole Assy for 7500cs/ce/cx |
| G1833-65138 | Reaction Cell Screw and Spacer Kit |
| G1833-65332 | O-rings for vent valve, Viton 2/pk |
| G1833-65404 | Polishing par kit 5 shts No.400+1200 |
| G1833-65405 | Interface wrench, sampling cone removal |
| G1833-65411 | Drain tubing kit, s/chamber to ri pump |
| G1833-65412 | Plastic tray for sample intro area |
| G1833-65413 | Extraction lens 2 for 7500a/i/s |
| G1833-65414 | PTFE tubing for carrier/Makeup gas, 2/pk |
| G1833-65417 | Extraction lens 1 for 7500a/i/s |
| G1833-65418 | Omega lens assembly for 7500a/i/s |
| G1833-65427 | Quartz T-connector for optional gas |
| G1833-65429 | Hose,for cooling water, 10m |
| G1833-65444 | Plate bias (for Slim ring Q-pole), 7500 |
| G1833-65464 | Connector polyprop use w/inert intro kit |
| G1833-65477 | Makeup gas line connector,Luer ty,7500 |
| G1833-65494 | Plate Bias (Eagle Q-pole) 7500a/i/s/c/cs |
| G1833-65499 | Extraction lens for 7500c |
| G1833-65500 | Einzel lens 1 for 7500C |
| G1833-65501 | Einzel lens 2 for the 7500c |
| G1833-65502 | Einzel lens 3 for the 7500c |
| G1833-65503 | Octopole assy for 7500c |
| G1833-65572 | PFA sample tubing 0.15 id, 1.6 od, 70 cm |
| G1833-65573 | PFA sample tubing,0.2 id,1.6 od,70cm,3/p |
| G1833-65577 | PTFE ta for ristaltic pump |
| G1833-65578 | Screw + spacer kit for Agilent 7500c |
| G1833-65582 | Fitting for drain tubing (10/pk) |
| G1833-65583 | Carrier gas line connector Microflow neb |
| G1833-65592 | Extraction lens 1 for s-lens for ICP-MS |
| G1833-65593 | Extraction lens 2 for s-lens for ICP-MS |
| G1833-65594 | Omega bias lens for 7500cs |
| G1833-65595 | OMEGA LENS For 7500CS |
| G1833-65596 | Extraction-Omega lenses assy 7500cs |
| G1833-65597 | Cell Focus lens for 7500cs |
| G1833-65598 | Cell Entrance lens for 7500cs |
| G1833-65599 | Focus lens for Q-pole, 7500ce,cx,cs |
| G1833-66000 | Cell Exit lens for 7500cs |
| G1833-66001 | Reaction cell assembly for 7500cs |
| G1833-66011 | Alignment Plate for RF Coil, ICP-MS |
| G1833-66024 | Strainer for cooling water |
| G1833-66035 | O-Ring for Reaction cell, 7500ce/cx, 2/p |
| G1833-66042 | O-Ring for water filter cartridge, 7500 |
| G1888-60701 | Headspace Leak Test Kit |
| G1946-20087 | Skimmer 2 |
| G1946-20089 | Skimmer 1 |
| G1946-20213 | Ferrule, Nebulizer, Polyimide + Graphite |
| G1946-20215 | Nebulizer Adjustment Fixture |
| G1946-20274 | Flanged Needle Holder |
| G1946-20301 | H.T. Capillary cap |
| G1946-60157 | LCMS TOOL KIT |
| G1946-67037 | Tested APCI Nebulizer Assembly |
| G1946-67098 | Tested ESI Nebulizer Assy |
| G1946-67260 | Microflow Nebulizer Assy |
| G1946-68703 | ESI Nebulizer Accessory Ship Kit |
| G1946-68704 | APCI Needle Replacement Kit |
| G1946-80009 | Glss Cplry for G1946A-C |
| G1946-80049 | Nebulizer 25X Magnifier |
| G1946-85020 | Delay Calibrant |
| G1946-85021 | Ammonium Formate for LC/MS |
| G1947-20029 | Corona Needle APCI, 1 each |
| G1958-60137 | Nebulizer(needle SST316 replacement) kit |
| G1958-67098 | ES Tested Nebulizer, Support Assy |
| G1960-20030 | APCI Needle |
| G1960-20032 | ESI Needle |
| G1960-20033 | Microflow Neb Needle |
| G1960-80060 | Capillary, FS, 0.6MM |
| G1964-80659 | Capillary, 6 x 0.61mm x 90mm, 1G |
| G1969-85000 | ESI-L Low Concentration Tuning Mix 100ml |
| G1969-85001 | API-TOF Reference Mass Solution Kit |
| G1969-85003 | 1S-TOF Biopolymer Anlys Ref Mass Sol Kit |
| G1969-85020 | MMI-L Low Concentration Tuning Mix 100ml |
| G1972-60025 | Target Plate for AP-MALDI LC/MS |
| G1972-85000 | AP-MALDI Matrix Dilution Solvent |
| G1978-85000 | ESI/ APCI LC Demo Sample, 5 ampoules 1mL |
| G1982-85001 | Chip Cube High Mass Reference (HP-1221) |
| G1982-85002 | Chip Cube High Mass Solvent (FC-70) |
| G1982-85003 | Chip Cube Low Mass Reference sample |
| G1999-20021 | 5973 Gold Fil Screw (M2 X 0.4 10MM-LG) |
| G1999-20446 | 73CI Drawout Plate |
| G2037A | Alpha-Cyano-4-Hydroxycinnamic Acid |
| G2038A | Sinapinic Acid Matrix (3x3 ml) |
| G2039A | 2.5 Dihydroxybenzoic Acid Matrix |
| G2173-64000 | Agilent LC Diagnostic CD ROM |
| G2250-04500 | Rack holding 1100 tray for G2250A |
| G2250-04501 | Rack 209 for 2ml vials (12 x 32mm), 96 |
| G2250-04504 | Rack, 205H for 2 deep wellplates |
| G2250-87300 | Capillary, 1um, 0.17mm id 1/16in male |
| G2258-23101 | Piston guide, EK for G2258A ALS |
| G2258-23201 | Frit Adapter, PTFE for 18" od tubing |
| G2258-60002 | Buffer loop extension assy for G2258A |
| G2258-60003 | Piston for G2258A Dual Loop ALS, 5 mL |
| G2258-60011 | Tray for Well Plate Autosampler |
| G2258-68710 | Needle Kit for G2258A Dual Loop ALS |
| G2258-87102 | Twin needle seat assy for G2258A |
| G2258-87300 | Buffer Loop Tubing Assy, PTFE |
| G2258-87301 | Capillary inj valve to preparative head |
| G2258-87307 | Drawing Tube Assy for flush solvent |
| G2258-87310 | Waste tube, 0.8 mm id, 15 cm long |
| G2258-87312 | Front seat tube PTFE 0.25mm id 10cm long |
| G2258-87313 | Back seat tube PTFE 0.25mm id 12 cm long |
| G2258-87314 | Tubing assy, solvent flush for G2258A |
| G2258-87315 | Back Seat Tube, SST 0.5 mm id 12 cm long |
| G2258-87316 | Front seat tube SST 0.5 mm id 10 cm long |
| G2260-68711 | 5ml Multi draw loop for use with G2260A |
| G2260-87101 | Needle seat for G2260A autosampler |
| G2260-87201 | Needle assy for G2260-87101 needle seat |
| G2260-87300 | Capillary sampler to column, SST |
| G2260-87301 | Capillary pump to sampler,SST40cm,0.50mm |
| G2350-61090 | Discharge Tube Kit for G2350 |
| G2397-20540 | Micro ECD Mixing Liner |
| G2397-60510 | Micro ECD Assy |
| G2397-60515 | MicroECD Assy.-Japan Labeled |
| G2398-60515 | MicroECD-Japan GENERAL |
| G2421-60001 | ESI Tuning Mix 100ml |
| G2425A | APCI Negative Ion rformance Standard |
| G2427A | API-ES Nebulizer needle (ea) |
| G2428A | APCI Nebulizer Needle (ea) |
| G2431A | ESI Tuning Mix (for Ion trap) 100ml |
| G2440-60200 | Ceramic Channel Electron Multiplier AY |
| G2441-80010 | Electron Multiplier Ceramic Channel |
| G2455-85001 | HSA ptide Standard Mix Kit |
| G2474-85000 | Fluoranthene, 99pct, bottle of 5 g |
| G2474-85001 | Phosphoptide Standard Mixture |
| G2571-80103 | Electron multiplier horn, high gain |
| G2589-20043 | 5973 Inert/Ultra Ion Source Body |
| G2589-20044 | 73 G2860A Reller Ultra Clean |
| G2589-20045 | 73 G2860A DrawoutP |
| G2589-20100 | 73inert Draw out plate, 3mm |
| G2589-20101 | Inert Source Washer |
| G2617-60507 | PTV Septumless head, 6890 |
| G2617-80550 | PTV COL ADAPTER TUBE |
| G2630-60710 | Oven exhaust deflector for 6850 |
| G2855-20530 | Internal Nut,CFT Capillary fitting |
| G2855-20532 | Internal nut, CFT 1/16inch SS fitting |
| G2855-20590 | Column storage fitting |
| G2855-60200 | Ferrule Pre-Swage Tool,Capillary Flow |
| G2855-60570 | Plug for microfluidic manifold or unions |
| G2860A | Standard 5973/75 Extended Linearity Appl |
| G2933-85003 | Sulfur Trap for SCD |
| G3138-65000 | ISIS Tubing kit |
| G3138-65102 | Joint Holder for Agilent 7500 ISIS Pump |
| G3138-65103 | Joint Holder for ISIS Pump |
| G3138-65104 | Sample Line Connector,ISIS |
| G3138-65117 | Rotor Seal for Valve,ISIS |
| G3138-65118 | Nut for valve, ISIS, 6/pk |
| G3138-65119 | Ferrule for valve, ISIS, 6/pk |
| G3138-65121 | Mixer for ISIS |
| G3138-65122 | Sample loop, 100 uL, ISIS |
| G3138-65125 | Plastic Tray ISIS |
| G3138-65129 | Plug for Cross Joint, 3pcs. |
| G3138-65130 | Gas/Liquid Separator set,ISIS |
| G3138-65131 | Separator Gas Chamber,ISIS |
| G3138-65132 | O-ring for the Filter,ISIS |
| G3138-65133 | Separator Holder,ISIS |
| G3138-65134 | Exclusive Concentric Nebulizer,ISIS |
| G3138-65136 | Cyclone Chamber,ISIS |
| G3138-65137 | Membrane filter, 10/pk, ISIS |
| G3138-65138 | Tubing for Gas Line,PTFE,3.0mm ID,5m |
| G3138-65139 | Reducing Union Connector,6mm x 3mm,ISIS |
| G3138-65140 | Reducing Union Connector,6mm x 4mm,ISIS |
| G3138-65141 | Plug for Carrier Gas Connector,3/Pk,ISIS |
| G3138-65144 | Reducing Union connector,8mm x 4mm, ISIS |
| G3138-65157 | Ferrule for 0.25 mm id pump tubing |
| G3138-65158 | ISIS Tubing adapter (ISTD/ripump) |
| G3154-65001 | As sciation column for drinking water |
| G3154-65002 | Guard column for AS sciation |
| G3154-90011 | As Sciation Analysis Handbook |
| G3154-96011 | As Sciation Analysis Handbook (JP) |
| G3158-20004 | Clamp Plate (EK) |
| G3158-60010 | PFA tube 1/8inch, 2 m |
| G3158-65000 | Transfer line,GC-ICP-MS Interface, 7500 |
| G3158-65001 | Injector assembly for GC interface, 7500 |
| G3158-65002 | SS Pi,1/16in,with connector,GC-ICP-MS |
| G3158-65003 | Stainless steel pi 1/16 in GC-ICP-MS |
| G3158-65004 | Ferrule kit for GC-ICP-MS Interface |
| G3158-65005 | Graphite ferrule for GC-ICP-MS Interface |
| G3158-65006 | Xe Gas Mixture T union |
| G3158-65007 | Torch for GC-ICP-MS Interface, 7500 |
| G3158-65008 | Alignment Boss GC-ICP-MS |
| G3158-65009 | Ball Joint GC-ICP-MS |
| G3158-80009 | Nut for connecting transfer line, ICP-MS |
| G3158-80050 | Injector assembly for GC-ICP-MS |
| G3158-80060 | Transfer line for GC-ICP-MS Interface |
| G3158-80074 | Torch for GC-ICP-MS Interface |
| G3158-80080 | Pre-heating pi w/connector GC-ICP-MS |
| G3158-80081 | Stainless steel pi, 1/16 in GC-ICP-MS |
| G3158-90021 | GC Interface Manual |
| G3160-60015 | Holder for carry tray cover, I-AS |
| G3160-65306 | PFA needle 0.3 mm id, std probe for I-AS |
| G3160-65307 | External rinse bottle 100mL, w/caps, 6/p |
| G3160-65320 | Rinse solution inlet/outlet tubing, I-AS |
| G3160-65321 | Tray Cover,I-AS |
| G3160-65324 | PFA Needle, 0,8 mm ID |
| G3160-65325 | Tubing holder, EK, micro flow neb. |
| G3160-65328 | Drain tube to rinse + drain bottles I-AS |
| G3160-67000 | Drain tube Tygon, 3/32 x 5/32, 5m |
| G3160-80041 | Needle holder for I-AS |
| G3160-80043 | Washing bottle,I-AS |
| G3160-80060 | I-AS tray A, 89 positions for 6 mL vials |
| G3160-80061 | I-AS Tray B, 53 positions for 18mL vials |
| G3160-80062 | I-AS Tray C, 18 positions for 50mL vials |
| G3160-80063 | I-AS tray D, 79x2mL + 10x18mL positions |
| G3160-80064 | I-AS tray E, 79x6mL + 10x18mL positions |
| G3160-80065 | I-AS Tray F, 15 places for 48mm od vials |
| G3160-80200 | Serial-USB Converter cable for I-AS |
| G3160-90021 | Integrated Autosampler (I-AS) Manual |
| G3160-96021 | Integrated Autosampler (I-AS) Man'l (JP) |
| G3163-20530 | RTGA Draw out Plate |
| G3169-60170 | Anodized Reller Assembly (SST) |
| G3170-20126 | Entrance Lens Assembly (HM) |
| G3170-20530 | Lens insulator,597X MSD |
| G3170-60171 | 5975C Inert EI 350 Reller Assembly |
| G3170-60172 | 5975C SST EI 350 Reller Assembly |
| G3170-60416 | 5977 CI 350 Reller Heater assembly |
| G3170-80002 | 5975 Calibrant Bulb |
| G3170-80006 | Foreline Pump Exhaust Fitting |
| G3170-80103 | Triple axis electron multiplier, 5975 |
| G3170-80105 | Triple Axis Detector Assy,5975 Ceramic |
| G3182-61580 | Ultimate Union Kit, Deactivated |
| G3182-61581 | Ultimate Union Kit, non-deactivated |
| G3184-60065 | Tee,inert for capillary flow technology |
| G3185-60300 | QuickSwap Restrictor Variety Pack |
| G3185-60361 | QuickSwap Restrictor, 0.092 ID, 4Pack |
| G3185-60362 | QuickSwap Restrictor, 0.100 ID, 4 Pack |
| G3185-60363 | QuickSwap Restrictor, 0.110 ID, 4 Pack |
| G3185-60364 | QuickSwap Restrictor, 0.120 ID, 4 Pack |
| G3199B | Quiet Cover II for LCMS rough pump |
| G3268-80001 | Cr sciation column for drinking water |
| G3270-20067 | Plug for make-up gas conn HMI 7500s.1/pk |
| G3270-60207 | End Cap assembly for HMI kit, 7500 |
| G3270-60639 | Screw + spacer kit extraction Omega lens |
| G3270-65001 | Basic Consumables Kit for 7500cx ICP-MS |
| G3270-65002 | Comprehensive consumables kit for 7500cx |
| G3270-65006 | Comprehensive consumables kit for 7500A |
| G3270-65007 | Comprehensive consumables kit for 7500cs |
| G3270-65021 | Plasma and Aux gas line tubing set.2/pk |
| G3270-65023 | Extraction-Omega lens assy for 7500ce/cx |
| G3270-65028 | Extraction Lens 1 for 7500ce/cx |
| G3270-65029 | Extraction lens 2 for 7500ce/cx |
| G3270-65030 | Omega Lens for 7500ce/cx |
| G3270-65031 | Omega bias lens for 7500ce/cx |
| G3270-65035 | Stainless steel tubing, 1/8in od, 6m |
| G3270-67003 | Sampling Cone,Nickel Plated |
| G3270-80024 | Quartz connector tube, dilution, HMI kit |
| G3270-80026 | Quartz connector tube, Oxygen, HMI kit |
| G3270-80300 | Spray chamber ultra trace B analysis 1/p |
| G3280-01507 | Interface wrench for Sampling cone |
| G3280-01650 | Omega bias lens for ICP-MS x-lens |
| G3280-20504 | Retaining ring, sampling cone, ICP-MS |
| G3280-20576 | Plug for dilution port (1/8 inch) |
| G3280-20618 | Cell entrance lens, ICP-MS, 1/pk |
| G3280-20628 | Deflect lens, ICP-MS, 1/pk |
| G3280-20633 | Cell focus lens, ICP-MS, 1/pk |
| G3280-20646 | Omega bias lens for s-lens, ICP-MS |
| G3280-20653 | Omega lens for s-lens, ICP-MS |
| G3280-20663 | Tubing for reaction cell gas, 1/pk |
| G3280-20664 | Cell exit lens, ICP-MS. 1/pk. |
| G3280-40103 | Sample tray for ICP-MS, 1/pk. |
| G3280-60077 | Tygon tubing (3m), for ICP-MS |
| G3280-60160 | Ar gas tubing kit for x-lens, ICP-MS |
| G3280-60163 | Ar gas tubing kit for s-lens, ICP-MS |
| G3280-60381 | Offset skimmer assembly, 1pk. |
| G3280-60502 | Interface wrench, skimmer cone removal |
| G3280-60555 | Drain tubing assembly for ICP-MS |
| G3280-60580 | Organic solvent introduction kit, ICP-MS |
| G3280-60590 | On-line Int Standard addition kit ICP-MS |
| G3280-60609 | Omega lens for x-lens, ICP-MS, 1/pk |
| G3280-60612 | Extraction lens 1 for x-lens for ICP-MS |
| G3280-60613 | Extraction lens 2 for x-lens for ICP-MS |
| G3280-60615 | Plate bias for ICP-MS |
| G3280-60650 | Reaction cell assembly, ICP-MS |
| G3280-60671 | Offset skimmer tool, ICP-MS, 1/pk |
| G3280-60910 | Maintenance Video/DVD for ICP-MS |
| G3280-67003 | Basic consumables kit, ICP-MS |
| G3280-67004 | Comprehensive spares kit ICP-MS w/x-lens |
| G3280-67007 | Comprehensive spares kit ICP-MS w/s-lens |
| G3280-67022 | Carrier/Make-up/Dilution gas tubing |
| G3280-67023 | Plasma/Aux gas tubing with inner sleeve |
| G3280-67035 | Extraction-Omega lens assy for s-lens |
| G3280-67037 | Screw and spacer kit for x-lens, ICP-MS |
| G3280-67038 | Screw and spacer kit for s-lens, ICP-MS |
| G3280-67039 | Extraction-Offset lens assy for x-lens |
| G3280-67044 | Screw/Spacer/O-ring for cell, ICP-MS |
| G3280-67045 | Octopole assembly, ICP-MS, 1/pk |
| G3280-67046 | Manual vent valve for ICP-MS, 1/pk |
| G3280-67062 | T-Joint with Earth block for ICP-MS, 1/p |
| G3280-67085 | Comprehensive spares kit, 7700e ICP-MS |
| G3280-67110 | Spacer (deflect/plate b.), 4/pk |
| G3280-80503 | Scial spray Chamber (long arm), ICP-MS |
| G3280-90002 | 7700 Series ICP-MS Hardware Manual |
| G3280-90006 | 7700 Hardware Maintenance Manual |
| G3280-90007 | 7700 Hardware Maintenance Manual |
| G3280-90036 | MassCard for 7700 and 8800 ICP-MS 100/pk |
| G3280-96002 | 7700 Series ICP-MS Hardware Manual (JP) |
| G3280-96006 | 7700 Hardware Maintenance Man'l-Japanese |
| G3280-96007 | 7700 Hardware Maintenance Manl-Japanese |
| G3286-90013 | ASX-500 Series Autosampler Manual |
| G3286-96013 | ASX-500 Series Autosampler Manual(JP) |
| G3288-80000 | As sciation column for ICP-MS |
| G3292-80010 | Poly-Clear fluid (for G3292A Chiller) |
| G3292-80109 | Fluid Filter (for G3292A Chiller) |
| G3292-80112 | Air Filter for G3292A Chiller |
| G3431-60680 | FID Ignitor Cable |
| G3432-60220 | TCD Base Assembly - Tested |
| G3433-63000 | Micro ECD Mug Adapter |
| G3434-60806 | NPD bead,Blos |
| G3435-60330 | FPD+ Exit Tube Assembly |
| G3435-60350 | Packed-Capillary Adapter Assembly |
| G3452-60570 | Cap Inlet Shell Weldment,7890, Inert |
| G3452-60586 | Capillary Insert Weldment, Inert, 7890 |
| G3452-60730 | Split/Splitless Inlet Insert w/Vent Full |
| G3452-60835 | Septum Retainer Nut for Transfer Line |
| G3480-67585 | 7890 Insert Weldment Assembly, Valves |
| G3510-20018 | Column Nut Adapter - Graphite |
| G3660-90001 | 8800 Hardware Maintenance Manual |
| G3660-90002 | 8800 Hardware Maintenance Manual |
| G3690A | Comp spares, ICP-MS w/x-lens, excl cones |
| G3850-80650 | Exhaust Deflector Assembly, GC/QTOF |
| G3870-20440 | Extraction Source Body |
| G3870-20444 | Extraction Lens, 3mm |
| G3870-20445 | Insulator, Extraction Lens Ring |
| G3870-20448 | Extraction Lens, 6mm |
| G3870-20449 | Extraction Lens, 9mm |
| G3870-20530 | Extraction Lens Insulator |
| G3870-67171 | 5977 Extraction EI 350 Reller Assembly |
| G3870-67172 | 5977 SST EI 350 Reller Assembly |
| G3870-67173 | 5977 EI Inert 350 Reller Assembly |
| G3970A | Inert Flow Path Upgrade kit, 7890 |
| G4204-40000 | Clamp for in-line filter |
| G4204-40005 | EK seal for inlet weaver assembly |
| G4204-60004 | Outlet filter 1290 quat-pump |
| G4204-60022 | Inlet Valve 1290 quat-pump |
| G4204-81090 | Low pressure mixer assembly |
| G4208-68700 | USB Memory Stick for G4208A, |
| G4212-60007 | Max-Light Cartridge Cell 60mm |
| G4212-60008 | Max-Light Cartridge Cell 10mm V(o)1.0ul |
| G4212-60011 | Max-Light Cartridge Test Cell |
| G4212-60022 | Pressure relief valve |
| G4212-60032 | 3.7 mm HDR max light cartridge cell |
| G4212-60038 | 10 mm ULD max light cartridge cell |
| G4212-68001 | Agilent Inline Pressure Relief Valve Kit |
| G4216-68711 | Large volume injection kit for 1290 |
| G4218-20000 | Standard Flow Nebulizer |
| G4218-20001 | Semi Micro Flow nebulizer |
| G4218-20002 | Large Flow Nebulizer |
| G4218-20003 | Micro Flow Nebulizer |
| G4218-20004 | RRLC Nebulizer for G4218A ELSD detector |
| G4218-40000 | Nebulization chamber,glass |
| G4218-40010 | Black plastic nut, 13mm dia-glassware |
| G4218-40011 | Black plastic nut, 22mm dia-glassware |
| G4218-40100 | Drain tube with stainless steel fitting |
| G4218-40110 | Black exhaust tube,2.5m |
| G4218-40130 | Bulkhead |
| G4218-40150 | Cartridge 0.01 um for gas regulator |
| G4218-40220 | Pneumatic tube with SS fitting,check |
| G4218-60100 | Gas regulator w filter 0.01um, manometer |
| G4218-68010 | Seal kit for nebulization chamber |
| G4220-20001 | Spacer Fitting |
| G4220-20020 | Internal gold seal for 1290 outlet valve |
| G4220-60006 | Jet Weaver, 35 ul/100 ul |
| G4220-60007 | Bottle Head Assembly |
| G4220-60012 | Jet Weaver 380 ul |
| G4220-60015 | Support ring integrated for 1290 pump |
| G4220-60016 | Seal holder integrated for 1290 pump |
| G4220-60017 | Bottle Head Assembly Ultra Clean Tubing |
| G4220-60022 | Inlet Valve |
| G4220-60028 | Outlet Valve 1290 Infinity pump |
| G4220-60035 | Tubing kit 140mm, 2/pk |
| G4220-60070 | Tubing Kit 140mm - Ultra Clean Tubing |
| G4220-60122 | 1290 Infinity inlet valve ty N |
| G4220-60128 | 1290 Infinity outlet valve ty N |
| G4220-63010 | Support ring 1290 InfinityLC w/seal wash |
| G4220-68070 | Ultra Clean Tubing Kit for G4220A |
| G4220-68705 | Accessory kit 1290 Infinity pump |
| G4220-87000 | Capillary interconnect assembly |
| G4226-60021 | Micro Vial Tray |
| G4226-60301 | SST Cap. 0.17mm ID 160mm pre-swaged |
| G4226-60310 | Loop assembly |
| G4226-67001 | Door repair kit for 1290 sampler |
| G4226-68735 | PM KIT for HiP Sampler G4226A |
| G4226-87012 | Seat assembly 0.12mm 1290 Infinity LC |
| G4226-87020 | Needle seat 1290 low disrsion |
| G4226-87201 | Needle Assembly |
| G4240-23705 | Rotor, Inner Valve, 3grooves, Chip LC |
| G4240-25206 | Rotor Outer Valve, 5grooves, Chip LC |
| G4240-43200 | EK fitting,scial for Chip-LC |
| G4240-64025 | mAB-Glyco Enablement Kit |
| G4240-87300 | Fused Silica/EK Capillary, 15um 90cm |
| G4240-87301 | Fused Silica/EK Capillary 25um,105cm |
| G4240-87302 | Fused Silica/EK Cap 100um,100cm |
| G4240-87303 | Fused Silica/EK Cap 75um,100cm |
| G4240-87304 | Fused Silica/EK capillary 50um 50cm |
| G4240-87309 | EK capillary, 25um x 105cm |
| G4240-87310 | EK Capillary, 25um x 10cm |
| G4280-60004 | Dual channel gradient valve |
| G4280-60029 | Solvent selection valve for 1120 |
| G4280-60031 | Purge valve assy for 1120 Compact LC |
| G4280-60033 | Purge valve actuator for compact LC |
| G4280-60034 | Tubing,PTFE,16cm with fittings,3mm od |
| G4280-60061 | Purge Valve 1220 |
| G4280-60500 | Passive inlet valve replacement kit |
| G4280-67304 | LC pump connecting tube,PTFE |
| G4280-68708 | Solvent selection valve kit f. 1120/1220 |
| G4280-68710 | PM Kit 1120 Compact LC,Manual Injector |
| G4280-68730 | PM Kit 1120 Compact LC,Auto Injector |
| G4280-68750 | PM Kit for 1220 LC with manual |
| G4280-68770 | PM Kit for 1220 LC with ALS |
| G4280-81300 | Capillary,damr 1,SS,0.6mm id |
| G4280-81301 | Capillary,damr 2,SS,0.6mm id |
| G4280-87305 | Narrow bow EK capillary 0.18 mmid 21cm |
| G4301-60100 | Flow cell for 1260 Infinity SFC |
| G4301-60120 | Wash Pump Check Valve PKG OF 2 |
| G4301-60130 | Wash Pump Piston Assy |
| G4301-60140 | Wash Pump Seal Kit for 1260 Infinity SFC |
| G4301-60150 | Wash Pump Transfer Line |
| G4301-60160 | Wash Pump Transfer Line (EVO) |
| G4301-60210 | Check Valve Cartridge; 0.125 ball |
| G4301-60230 | Check Valve Holder (A5) |
| G4301-60240 | Check Valve Gasket, 5pk |
| G4301-60241 | Check Valve Gasket Outlet |
| G4301-60250 | A5 Pump Seals, for 1260 Infinity SFC,2pk |
| G4301-60260 | Booster Pump Head for 1260 Infinity SFC |
| G4301-60300 | CO2 Supply Line for 1260 Infinity SFC |
| G4301-60310 | Pump Transfer Line for 1260 Infinity SFC |
| G4301-60320 | Return Transfer Line |
| G4301-60330 | Pressure sensor Witness line long |
| G4301-60340 | Pressure sensor Witness line short |
| G4301-60350 | Tee for Valco for 1260 Infinity SFC |
| G4301-60560 | Cross and Cap. Kit for Aux Pres.Sensor |
| G4302-60066 | Inlet Valve for SFC Pump |
| G4309-68000 | SFC MS connection Kit |
| G4513-20561 | Mounting post for 7693 and 7650 ALS |
| G4513-40525 | Needle support insert, standard, 7693 |
| G4513-40529 | Needle support insert, on column, 7693 |
| G4514-60710 | Gripr finger caps for 7693 |
| G4514-67505 | Vial rack kit, 3 Racks, 3 white labels |
| G4522-60500 | Metal Vial Rack Assy. |
| G4525-60701 | Vial rack label kit for 7693 |
| G4556-60019 | 7697A Tray Rack |
| G4556-60125 | 7697A Sample Probe, Deactivated SN 2000 |
| G4556-60690 | 7697A Sample Probe, Deactivated SN 1030 |
| G4556-67010 | Leak Test Kit |
| G4556-80101 | Sample loop, Headspace 0.025 ml, SN2000 |
| G4556-80102 | Sample loop, Headspace 0.05 ml, SN2000 |
| G4556-80103 | Sample loop, Headspace 0.10 ml, SN2000 |
| G4556-80105 | Sample loop, Headspace 0.50 ml, SN2000 |
| G4556-80106 | Sample loop, Headspace 1.00 ml, SN2000 |
| G4556-80108 | Sample Loop, HS 3.00 ml, SN2000 |
| G4556-80109 | Sample loop, HS 5.00 ml, SN2000 |
| G4556-80111 | Sample loop, Headspace 0.025 ml, SN1030 |
| G4556-80112 | Sample loop, Headspace 0.05 ml, SN1030 |
| G4556-80113 | Sample loop, Headspace 0.10 ml, SN1030 |
| G4556-80115 | Sample loop, Headspace 0.50 ml, SN1030 |
| G4556-80116 | Sample loop, Headspace 1.00 ml, SN1030 |
| G4556-80118 | Sample Loop, HS 3.00 mL, SN1030 |
| G4556-80119 | Sample Loop, HS 5.00 mL, SN1030 |
| G4556-80126 | Sample Loop, HS, Cert. 1.00 mL, SN2000 |
| G4556-80128 | Sample Loop, HS, Cert. 3.00 mL, SN2000 |
| G4556-90500 | 7697A Tray labels |
| G4911-01201 | Joint holder for nebulizer pump, ICP-MS |
| G4911-20021 | ri pump tubes adapter (for 2.29mm id) |
| G4911-60011 | Tray for ISIS used with ICP-MS |
| G4911-67001 | Comprehensive spares kit for ISIS-DS |
| G4911-68201 | Preconfigured kit, ISIS Auto-dilution |
| G4911-68202 | Preconfigured kit ISIS Discrete sampling |
| G4911-68210 | Hydride Generation kit for ISIS |
| G4911-90021 | ISIS Manual, ICP-MS, 1/pk |
| G4911-96021 | ISIS Manual (JP), ICP-MS, 1/pk |
| G5201-60000 | Tray for G5201A Mass Code UV |
| G5201-60100 | Lamp assembly for G5201A Mass Code UV |
| G5611-21503 | Bio-inert piston seal |
| G5611-26210 | Bio-inert seal keer |
| G5611-60016 | Seal holder for Bio inert pump |
| G5611-60020 | Bio-Inert Cartridge Active Inlet Valve |
| G5611-60025 | Bio-inert active inlet valve |
| G5611-60061 | Bio-Inert Purge Valve |
| G5611-60067 | Bio-inert outlet ball valve |
| G5611-63010 | Bio-inert support ring |
| G5611-68741 | PM kit for Bio inert quat pump |
| G5615-60005 | Bio-inert FLD flow cell |
| G5615-60017 | Max-Light Cartridge Cell 60mm BIO |
| G5615-60018 | Max-Light Cartridge Cell 10mm BIO |
| G5615-60022 | Bio-inert standard flow cell, RFID tag |
| G5615-87302 | Capillary PK 0.17 x 210mm SL/UB |
| G5615-87331 | Capillary Holder Cell 0.17mm BIO |
| G5664-68712 | Analytical Tubing Kit ID0.25mm PTFE-ESD |
| G5664-86703 | Bio inert EK tube from valve to needle |
| G5664-86706 | Bio inert EK tube valve to detector |
| G5667-40500 | Tool for needle adjustment |
| G5667-60320 | Sample loop 100uL Bio-inert |
| G5667-68735 | PM Kit for the Bio-Inert Sampler G5667A |
| G5667-87017 | Bio-inert seat assembly, 0.17 x 100 mm |
| G5667-87200 | Bio-inert needle assembly |
| G6011A | Quiet Cover MS for MS40 Pump |
| G6012A | Quiet Cover DS |
| G6014A | Quiet Cover for GCMS |
| G6500-60701 | ITEX-II Tenax Trap, TA 80/100, 3 pieces |
| G6500-88005 | Injection unit tension cord black, 280mm |
| G6500-88014 | Tension Cord, for GC/HTC Needle Guide |
| G6600-60028 | Quartz Tube Replacement Kit for SCD |
| G6600-60034 | Ceramic Tube Package,for SCD(before 8/95 |
| G6600-60035 | Ceramic Tube Kit for SCD/NCD SS Burner |
| G6600-60037 | Ceramic Tube Kit for SCD DP Burner |
| G6600-60038 | Ceramic/Quartz Tube Kit for NCD DP Burnr |
| G6600-60102 | No PT Screen Quartz Tube of NCD Burner |
| G6600-67007 | 12 Month PM Kit, RV5 Oil Pump for XCD |
| G6600-67008 | 12 Month PM Kit, Dry Piston Pump for XCD |
| G6600-80018 | Spare Column Nut and Ferrule kit |
| G6600-80042 | Replacement Oil Coalescing Filter |
| G6600-80043 | Oil Mist Filter for RV5 pump;SCD/NCD |
| G6600-80044 | Replacement Oil Coalescing Filter |
| G6600-80045 | Replacement Odor Filtration Element |
| G6600-80050 | O-Ring, 1.614 inch ID, Size 2-030 |
| G6600-80051 | O-Ring, 1.301inch ID for SCD/NCD |
| G6600-80063 | Dual Plasma Quartz Tube for NCD |
| G6600-85000 | Ozone Destruction Chemical Trap;SCD/NCD |
| G6600-85001 | Mobil 1 Synthetic Oil |
| G6600-85002 | Oil,Edwards Ultragrade,1L |
| G7005-60061 | Filament,high temrature EI for GCMS |
| G7005-60072 | CI Filament- 2PK |
| G7005-60170 | RIS Probe Maintenance Kit |
| G7100-60002 | Capillary cassette |
| G7100-60007 | Electrode assemb. standard for G7100only |
| G7100-60033 | Electrode assy short for G7100 only |
| G7100-60150 | Alignment interface for ext cap 25um id |
| G7100-60210 | Alignment interface for std cap 50um id |
| G7100-60230 | Alignment interface for ext cap 50um id |
| G7100-60310 | Alignment Interface for std cap 75um id |
| G7100-60330 | Alignment interface for ext cap 75um id |
| G7100-60400 | Alignment interface CE-MS cap 360um OD |
| G7100-62700 | 260nm Detector Filter Assembly |
| G7100-68705 | Agilent CE system accessory kit |
| G7100-68723 | High Sensitivity Cell Kit |
| G7100-68750 | 280nm cIEF Filter |
| G7200-90211 | MassHunter User Guide (English) |
| G7200-92211 | MassHunter User Guide (German) |
| G7200-93211 | MassHunter User Guide (French) |
| G7200-94211 | MassHunter User Guide (Italian) |
| G7200-95211 | MassHunter User Guide (Spanish) |
| G7200-96211 | MassHunter User Guide (Japanese) |
| G7200-97211 | MassHunter User Guide (Chinese) |
| G7201-90200 | MassHunter WS User Guide |
| G7201-90203 | Masshunter WS (7700) User Guide-English |
| G7201-90204 | Masshunter WS (7700) User Guide-English |
| G7201-90301 | Masshunter WS (8800) User Guide-English |
| G7201-90302 | MassHunter WS (8800) User Guide-English |
| G7201-92200 | MassHunter WS Quick Start Guide - German |
| G7201-93200 | MassHunter WS Quick Start Guide - French |
| G7201-94200 | MassHunter WS Quick Start Guide - Italy |
| G7201-95200 | MassHunter WS Quick Start Guide - Spain |
| G7201-96200 | MassHunter WS User Guide (Japanese) |
| G7201-96203 | Masshunter WS (7700) User Guide-Japanese |
| G7201-96204 | Masshunter WS (7700) User Guide-Japanese |
| G7201-96301 | Masshunter WS (8800) User Guide-Japanese |
| G7201-96302 | MassHunter WS (8800) User Guide-Japanese |
| G7201-97200 | MassHunter WS User Guide (Chinese) |
| G7205-90000 | MassHunter chromatographic SW manual |
| G7205-96000 | MassHunter Chromatographic Software (JP) |
| G7206-90000 | MassHunter Inligent Seq SW manual |
| G7206-96000 | MassHunter Inligent Seq SW Man'l (JP) |
| G7207-90000 | MassHunter WS User Access Control Pack |
| G7207-96000 | MassHunter WS User Access Control Pk-JP |
| G8000-64112 | Pre-optic window for 4100 MP-AES |
| G8000-64140 | Torch clamp for 4100 MP-AES |
| G8000-64143 | Drain tube kit for 4100 MP-AES |
| G8000-68002 | Inlet cooling air filter for 4100 MP-AES |
| G8000-70002 | Easy-fit torch - 4100 MP-AES |
| G8000-70004 | Concentric nebulizer for MP-AES |
| G8001-64004 | Inlet air filter kit - 4107 N2 Generator |
| G8003-67000 | High sens. sample intro kit, MP-AES 1/pk |
| G8003-67001 | Std aqueous sample intro kit MP-AES 1/pk |
| G8003-67003 | Pump tubing kit MP-AES, organic solvents |
| G8003-70000 | Easy-fit torch for 4200 MP-AES |
| G8140-63000 | LC Vial Rack |
| G8400-00240 | Omega bias lens for 7900 ICP-MS w/x-lens |
| G8400-40113 | Sample tray for 7900 Series ICP-MS, 1/pk |
| G8400-60215 | Extraction lens 1, 7900 ICP-MS w/x-lens |
| G8400-60216 | Extraction lens 2, 7900 ICP-MS w/x-lens |
| G8400-60217 | Omega lens for x-lens, 7900 ICP-MS, 1/pk |
| G8400-60218 | Extraction lens 1, 7900 ICP-MS w/s-lens |
| G8400-60219 | Extraction lens 2, 7900 ICP-MS w/s-lens |
| G8400-60434 | Work coil assembly for 7900 ICP-MS, 1/pk |
| G8400-60624 | Skimmer base, stainless, 7900 w/x-lens |
| G8400-60625 | Skimmer base, brass, 7900 w/x-lens. 1/pk |
| G8400-60626 | Skimmer base, brass, 7900 w/s-lens. 1/pk |
| G8400-60627 | Skimmer base, stainless, 7900 w/s-lens. |
| G8400-60628 | Offset skimmer base assembly, 7900, 1/pk |
| G8400-67001 | Extraction-Omega lens assy 7900 w/x-lens |
| G8400-67002 | Extraction-Omega lens assy 7900 w/s-lens |
| G8400-67003 | Screw + spacer kit, 7900 ICP-MS w/x-lens |
| GT430-20470 | Nebulizer Adjustment Fixture |
| HARRICK-KBR-100 | KBR powder, 100 grams, 1/pk |
| MKI-C-QSC10 | Quick fit connectors,Markes Unity PK10 |
| MKI-MTD-1169 | Stainless Steel Difflok Cap,Markes Unity |
| MKI-MTD-1204 | SilcoSteel Difflok Cap,Markes Unity |
| MKI-U-COV06 | O-Rings,Markes 6mm Cold Trap Seals PK 10 |
| MKI-U-COV07 | O-Rings,markes 7mm Cold Trap Seals PK 10 |
| MKI-U-COV10 | O-Rings,010 Markes Unity 10 pk |
| MKI-U-DISK1 | PTFE Filter Disks,5.1mm Markes TD PK 10 |
| MKI-U-DISK3 | PTFE Filter Disks,6.3mm Markes TD PK 10 |
| MKI-U-T11GPC | Spare general purpose carbon cold trap |
| MKI-U-T11GPC-2S | Cold Trap,GP Carbon,C4/5-C30/32 UNITY 2 |
| MKI-U-T12ME | Cold Trap,materials emissions,UNITY |
| MKI-U-T12ME-2S | Cold Trap,materials emissions, UNITY 2 |
| MKI-U-T13DHS | Cold Trap for DHS application, Series 1 |
| MKI-U-T13DHS-2S | Cold Trap for DHS application, Series 2 |
| MKI-U-T15ATA-2S | Cold Trap, TO-15/TO-17 ait toxic,Unity 2 |
| MKI-U-T3ATX | Cold Trap,Air Toxics, C2-C14,Unity |
| MKI-U-T3ATX-2S | Cold Trap,Air Toxics,C2-C14,UNITY 2 |
| MKI-UTD-5064 | Cold Trap Alignment Tool,Markes Unity |
| MKI-UTD-5105 | Sampling Tube,Tenax TA,Markes Unity |
| MKI-Z-0285 | O-Ring insertion tool,Markes Unity TDI |
| MKI-Z-0351 | O-Ring extraction tool,Markes Unity TDI |
| PCG9312A2LL12DP | Load and Lock 12inch Distribution plate |
| PCG9312APLL12BRB | Load and Lock 12inch Bed retainer boss |
| PCG9312APLL12LFSB | Load and Lock 12in Lower frit seal body |
| PCG9312APLL12SAR | Load and Lock 12inch Seal adapter ring |
| PCG9312APLL12UFSB | Load and Lock 12inch Frit Seal body |
| PCG932A12102 | 2 LOAD and LOCK INLET DIST. PLATE |
| PCG932A2LL2IF | 2in Load and Lock Inlet Frit 2u |
| PCG932A2LL2OF | 2 LOAD and LOCK OUTLET FRIT 2 mic. |
| PCG932APLL2FSB | 2in Load and Lock Frit Seal Body - EK |
| PCG933A12202 | 3 LandL Outlet Dist Plate |
| PCG936A6LL6ECSR | Frit Gasket Seal PTFE |
| PCG936A6LL6SR | Sealing ring PTFE |
| PIKE-160-1009 | KBR window, 25 x 4mm, 6/pk |
| PIKE-160-1010 | KBR, 32x3 mm, undrilled, 6/pk |
| PIKE-160-1015 | KBR, 32x3 mm, drilled, 6/pk |
| PIKE-160-1125 | 32 x 3mm KRS-5, drilled, 1/pk |
| PIKE-160-1126 | KRS-5 32x3mm, undrilled, 1/pk |
| PIKE-160-1127 | 25 x 4 mm KRS-5 window, 1/pk |
| PIKE-160-1133 | 25 X 4MM KBR WINDOW |
| PIKE-160-8016 | Kcl, 100 gram chunks, 1/pk |
| PIKE-161-1903 | Spare anvils Evacuable llet Press 1/pk |
| PIKE-162-1320 | PTFE O-rings Demountable Liq. Cell 12/pk |
| PL0810-0012 | AUTOSAMPLER NEEDLES (PK OF 2) |
| PL0810-4002 | Filter magazine 2 um stainless steel |
| PL0860-0450 | Nebulizer assy,PL-ELS 2100,1/pk |
| PL0860-0550 | O-ring,nebulizer PL-ELS 2100,2/pk |
| PL0870-6020 | PLUNGER SEAL |
| PL0870-6050 | INLET CHECK VALVE ASSEMBLY |
| PL0870-6060 | OUTLET CHECK VALVE ASSEMBLY |
| PL0870-6110 | Solvent inlet filter |
| PL0870-6380 | HOUSING IN-LINE FILTER |
| PL0870-8110 | SYRINGE PUMP |
| PL0870-8130 | PL-AS 4 ml Needle Assembly |
| PL0870-8140 | PL-AS 2 ml Needle Assembly |
| PL0890-0495 | Exhaust Tube for G4260B/G4261B ELSD |
| PL0890-0500 | Exhaust waste tube G4260B/G4261B ELSD |
| PL0890-0640 | ELSD air adapter kit G4260B/G4261B ELSD |
| PL1-24966 | ADAPTER ASSY 14-4MM |
| PL1-25351 | BOTTLE TRAP ASSY |
| PL2-24961 | WASTE OUTLET |
| PL2-25099 | WASTE OUTLET |
| PL4-20877 | NEBULISER GAS TUBING |
| R000048602 | Hanger,prep col for mast,1in.OD,1/pk |
| R000048610 | Hanger,for col 4.6mm,1/4in.OD,1/pk |
| R000481802 | VALVE PRIME/PURGE SS 1/16in |
| R007000507 | MIXING SEAL RETAINER W FRIT TI 10U |
| R007015061 | Clamp, Column Valve |
| R007101408 | CARTRIDGE INLET CHK VLV 51025ML |
| R007101409 | CARTRIDGE OUTLET CHK VLV 51025ML |
| R007101413 | SEAL,PRESSURE,.088ID,HST,GRAPH.,5ML |
| R007101416 | Cartridge, CV inlet, 18BL, 50100ML, TI |
| R007101417 | CARTRIDGE,CVOUTLET,18BL,50100200ML,TI |
| R007101422 | BACK-UP SEAL, F 10ML SSWSSWTI |
| R007101632 | Seal Backup Ring for 50ml |
| R007101634 | HD HSTLOY SEAL F 5ML LIQ HEAD |
| R007101635 | UHD HSTLOY Seal F/ 5ml |
| R007101636 | GRAPHITE HSTLOY SEAL 10ML SS WSS WTI |
| R007101639 | UHD HSTLOY Seal 10ml SS, WSS WTI |
| R007101650 | Flanged UHD HSTLOY Seal 50ml WSS |
| R007101656 | FLANGED UHD KALREZ SEAL 100WP WTI |
| R007101657 | PISTON ASSY W SPRING F5ML SS LIQ HEAD |
| R007101658 | PISTON ASSY W SPRING F10ML SS LIQ HEAD |
| R007101708 | CARTRIDGE,CV INLET,1/8BL,10ML,EK |
| R007105603 | Outlet ftg SD-1 50/200ml/min sys,5/pk |
| R007105605 | OUTLET FITTINGS SD-1 500800ML 5PK |
| R007105613 | INLET FILTER TUBE SD1 500800ML 10FT |
| R007105685 | COMPLETE SEAL KIT FSD-1 800ML |
| R007105686 | INLET CHECK VALVE FSD-1 500800ML |
| R007105687 | OUTLET CHECK VALVE FSD-1 500800ML |
| RE7030 | Valve,Rheodyne 7030,3-way,SS,1/16in,1/p |
| SCAC04090 | Polishing kit lapping par, 5/pk |
| 5188-5367 | Gold Plated W/W 推荐5190-6144 |
| 5190-2209 | Gold Plated 10/pk 推荐 5190-6145 |
地址：江苏昆山市新南中路888号纯高联邦国际1幢35
手机： 15312453299
邮箱：xianlu-su@kunshanlab.com
在线客服
电话咨询